Father’s Day 2020 is June 21, so you better get started on gift ideas if you want to impress dad this year. Whether your father is contractor, handyman, or DIYer, we’ve got a lot of great ideas for him this year.
For more more gift ideas, be sure to check out our past Father's Day Gift Guides from 2016, 2017, and 2018, 2019 or our Ultimate Construction Holiday Gift Guides from 2015, 2016, 2017, and 2018, and 2019.
We’ve been lucky enough to be able to use many of the tools on this list throughout the year and there are others on the list that we’d love to try because they have been highly regarded in reviews. It should be assumed that the tool manufacturers have given us these tools for free to test out, but none of them have paid to be a part of this gift guide. All tools on this list have been chosen by us, because we think they would be great gifts.
This post contains affiliate links, which earn us a small commission for the things that you buy. The prices in the links are exactly the same as they would be normally!
Ultimate Construction Father’s Day Gift Guide 2020
Under $50
Table Saw Dust Bag
This is honestly one of the best purchases I’ve made and it’s so inexpensive. Table saws are essential on many jobsites and workshops, but dust collection can be an issue. If you don’t have an extensive dust collection system or don’t want to deal with the extra noise of a vacuum, this Bosch table saw dust bag is a no brainer. I’ve been using it on my Milwaukee M18 cordless table saw and it collects probably 80-90% of the dust
Klein Tools Digital Circuit Breaker Finder
If you’re house is like mine, the labeling system inside your circuit breaker box is an absolute mess, which makes it extremely difficult to find the correct breaker to turn off when needed. The Klein Tools Digital Circuit Breaker finder is a 2-in-1 tool that not only can confirm that your outlets have been properly wired, but it can also help you easily locate the correct breaker an outlet is wired to. Simply plug the outlet tester into an outlet, bring the receiver wand to your breaker panel, and run the receiver down each breaker until the light indicates that the correct breaker has been found. Of course, you should ALWAYS double check that power has been turned off to whatever electrical system you need to work on before beginning.
Bosch Clic-Change Self Centering Drill Bits
Whever you’re installing hardware that requires more than one screw, the slightest misstep when drilling your pilot hole can cause the whole piece to become misaligned. These Bosch Self-Centering bits all but guarantee that your screw will be perfectly centered through the use of a spring loaded housing sized for #6, #8, and #10 screws.
OLFA MXP-AL or LA-X Utility Knife
Everybody probably already has a utility knife somewhere in their toolbox or junk drawer, but it’s probably not an OLFA. This Japanese-made knife is actually up to 8 blades-in-one, because you can snap off one section at a time if it gets dull. Paired with their new black speed blades, you not only get the convenience of multiple blades, but an extremely sharp, fast cutting knife.
The OLFA MXP-AL is their newest heavy duty knife, made with an aluminum shell. For a little less cost, the LA-X is a tried and true knife, as well, as it comes with the same blades, but it’s housed in a plastic shell with a rubber overmould.
Quickloader Retractable Ratchet Tiedown
If you own a truck, you know that securing a load can be a huge hassle, especially if you’re used to dealing with bungee cords or traditional tiedowns. With Quickloaders, there will never be any additional slack flapping in the wind, because the excess retracts back into it. It’s so easy, you can do it one handed. There are various sizes and strengths available on their website, starting at around $20, but the QL4500 is a good one to start with, at around $40.
New Milwaukee Workwear
You, of course, know Milwaukee Tool because of their power tools, but they have also had an extensive line of workwear for construction professionals for years, but they have just recently updated and expanded their lineup. In addition to updated versions of their Workskin lightweight, moisture wicking shirts, they have added heavy duty pocket shirts and hoodies. The heavy duty pocket shirts will align with a more traditional work shirt that many contractors have grown up wearing and the Workskin shirts are great for the hot summer months that are nearly upon us.
Craftsman Versastack 2-Drawer Unit
After being acquired by Stanley Black & Decker (SBD), Craftsman recently launched a brand new line of around 1,200 new tools. It already appears to be a good move for Craftsman tool lovers as it has breathed new life into the old Sears brand. One of the best buys in the new brand is the Versastack 2-drawer unit. Every tradesman or garage warrior needs additional storage and the Verstastack will not only stack on top of other Versastack units, but will also stack on DeWalt T-stack units, thanks to that aforementioned SBD acquisition. You can get it at Lowe’s for around $35.
Over $50
ISOtunes Free Wireless OSHA-Compliant Hearing Protection Headphones
Hearing protection is one of those things that construction workers ignore until years later when they realize they have lost a significant amount of their hearing. OSHA has strict hearing protection requirements to avoid hearing loss in workers, ISOtunes FREE Bluetooth Hearing Protectors offer a 22db noise reduction rating and they also limit the audio playback to 85db, keeping you below the actionable noise level.
These wireless ear buds will last for 7 hours, but the rechargeable charging case it comes with will provide an additional 14 hours of playback time.
If you’re looking for a more affordable option and don’t mind the cords, the ISOtunes Pro 2.0 offers similar features at a lower cost.
Keen Utility Cincinnati Work Boot
Keen Utility showed off their new Cincinnati work boot earlier this year at the World of Concrete and it’s hard not to love this boot at first glance. Sporting a classic wedge toe look, the Cincinnati is the beefed-upped heavy duty version of the Keen Utility San Jose Boot, which is a much beloved light duty boot of similar look. this boot is meant to withstand abuse from tough jobsites, sporting a waterproof liner to keep hyour feet dry, Goodyear welt construction to durability, and a super comfortable midsole.
DeWalt DCC020IB 20V Max Inflator
Everyone needs an inflator at some point, whether it’s an emergency roadside tire fill-up, bike tire top offs, camping mattresses, or those pesky pool floats. The DeWalt 20V MAX Inflator is the most versatile of them all, as it’s able to inflate high pressure or high volume and can be powered by battery, 12V DC (car plug-in), or a 110V wall outlet.
Besides its versatility, one of its greatest features is the ability to set the PSI you’d like to fill it to and it will automatically shut off when it reaches that level. You can read our full review of it by clicking here.
Milwaukee Tool M12 Installation Drill/Driver
During any project, there’s always at least one screw that needs to go in at an awkward angle. Thankfully, there are several multi-chuck drill/drivers on the market that can completely eliminate that frustration, the Milwaukee Tool M12 Instalaltion Drill/Driver being one of them. With 4 separate attachments, this drill/driver is an absolute dream for all of those odd angles and tight spaces you might find yourself in. This tool comes with 4 quickly interchangeable heads: a 3/8” drill chuck, a 1/4” hex driver, an offset, and a right angle.
DEWALT DCE511B 11" Corded/Cordless Jobsite Fan
The DeWalt 20V jobsite fan is a super-efficient, powerful, and convenient option for the workshop or jobsite. Delivering up to 500 CFM of air, the fan can easily last a full day on one battery. If your battery runs out of juice, no worries, because it can also be plugged into an outlet through an extension cord. Rated IP54 for dust and water resistance, it’s ready to be put to work in tough conditions.
Milwaukee M18 Quik-Lok Landscaping Attachment System
Wouldn’t it be nice if you could power a string trimmer, a hedge trimmer, a pole saw, and an edger with the same tool? Well, you can with Milwaukee’s Quik-Look attachment system. By quickly detaching the bottom half of the trimmer showed in the picture by loosening a knob and pressing a button, you can quickly change out to one of the 4 attachments using the same motor and same battery.
