photo by Andy Rogers, CC BY-SA 2.0
Even though the means to prevent trench collapses is pretty simple, dozens of construction workers continue to be killed by them every year. A few weeks ago, The Center for Construction Research and Training (CPWR) held a webinar on trenching and excavation hazards, the reduction of which is has been OSHA’s priority goal since 2018.
Read moreConstruction Junkie’s annual Best Construction Podcast of 2020 Competition is underway and the voting booth is officially open. As part of the competition, I will be individually highlighting each of the 12 nominees throughout until the booth closes on July 1. Next up is CONEXPO-CON/AGG Radio.
Read moreConstruction Junkie’s annual Best Construction Podcast of 2020 Competition is underway and the voting booth is officially open. As part of the competition, I will be individually highlighting each of the 12 nominees throughout until the booth closes on July 1. Next up is The Lien Zone Podcast.
Read more2 years ago, an under construction pedestrian bridge on Florida International University’s (FIU) campus collapsed onto the open road below, killing 6 people and injuring several more. After a 19 month investigation, the National Transportation Safety Board concluded their investigation late last year, largely placing the blame on the engineer of record’s design. Now, officials are ready to start the process of replacing the bridge.
Read moreFather’s Day 2020 is June 21, so you better get started on gift ideas if you want to impress dad this year. Whether your father is contractor, handyman, or DIYer, we’ve got a lot of great ideas for him this year.
For more more gift ideas, be sure to check out our past Father's Day Gift Guides from 2016, 2017, and 2018, 2019 or our Ultimate Construction Holiday Gift Guides from 2015, 2016, 2017, and 2018, and 2019.
Read morecourtesy of Milwaukee Tool
[updated 5/29/20] Back in June of 2019, Milwaukee hosted its annual New Product Symposium (NPS), a media event featuring hundreds of new products that they planned to release throughout the year and Construction Junkie was in attendance. Just when we thought we were done seeing all of the new tools after several hours of presentations and hands-on time, Milwaukee threw a curveball at us.
Read morecourtesy of Autodesk
As many across the construction industry have figured out, there is no single software that can fully encompass all of a company’s technological needs. According to a recent Construction Technology survey, nearly 75% of companies are integrating data at from at least 1 other software provider, highlighting the need of different software to talk to one another. Without these integrations, you’re forced to manually transfer redundant data from one program to another, wasting time and energy, while also increasing frustrations for your company’s daily users.
Read moreImage via Procore
With many states across the country slowly beginning to re-open amid the Coronavirus Pandemic, it’s been interesting to see how the construction industry has reacted. In the past, it’s been extremely difficult to get a firm grasp at how large sectors of the industry are affected by events, but with the influx of data being poured into relatively new technologies, we can start to gain a much clearer picture.
Read morephoto courtesy of Hili and Concrete Sencors
The only thing slower than watching paint dry is, well, watching concrete dry. Proper curing of concrete is extremely important, though, for quality and safety reasons. Perhaps equally important is proper testing and documentation of the concrete’s strength over time. In a move to help bolster their digital portfolio, power tool giant Hilti has acquired Concrete Sensors, an internet connected concrete testing startup.
Read moreAfter a round of nominations, the stage has been set for the 6th annual Best Construction Podcast Competition presented by Construction Junkie. This year we have several familiar faces, as well many new podcasts.
Read more
